AVS will:

TV and Video Setup:

• Connect the customer’s video components in one (1) room.
• Take away the boxes and packing, unless the customer requests to keep it.
• Connect the customer’s TV to a single source such as existing cable, antenna, or satellite signal.
• Integrate up to 7 components, including components already connected to an existing network.
• Additional charges apply for connecting components to new or existing networks. See Wireless or Wired Networked Component Hook Up.
• Ensure that all wires and cables are neatly dressed and wire ties are used when necessary.
• Set up remote control devices with proper codes allowing unit to control other components, as per factory-set specifications.
• Set up parental control / V-Chip.

Speaker Setup:

• Set up speaker system receiver, and/or sub woofer to operate up to a 7.1 surround sound system.
• Integrate up to 7 components, including components already connected to an existing network.
• Additional charges apply for connecting components to new or existing networks. See Wireless or Wired Networked Component Hook Up.
• Verify that all speakers are properly positioned and working.
• Ensure that all wires and cables are neatly dressed and wire ties are used when necessary.
• All speakers must be in one (1) room.
• Take away the boxes and packing, unless the customer requests to keep it.
• Consolidate and program product remotes to simplify functionality.

TV Mounting 33-60″:

• Secure the customer supplied (or factory included if applicable) mounting bracket under cabinet or to a standard frame wall.
• Mount and secure Flat Panel TV which is 33-60” screen size, to above bracket.
• Connect the TV power cord to an existing AC power outlet (surface connection only).
• Ensure that all wires and cables are neatly dressed and wire ties are used when necessary.

TV Wires Concealed:

• Create two access points for connection of A/V source component to video display (one at the video display and one at the A/V source component).
• Connect customer-supplied CL rated cables from the Flat Panel TV to a single tuner or A/V source component by routing up to ten (10) feet of cable through a standard frame wall.
• Ensure all wall-fished cable exit points are finished off with either a wall busing or specialized wall plate.

Speaker Mounting:

• Mount speaker(s) on-wall, in-wall, or in-ceiling either in-home or outside.
• Connect speaker(s) to audio receiver.
• Verify speakers are properly positioned and working.
• Ensure all wires are neatly dressed and wire ties are used when necessary.
• Spackle any area where access holes were created in walls.

Speaker Wires Concealed:

• Route and conceal up to fifteen (15) feet of basic speaker wire (included) per speaker, within standard frame wall or ceiling.
• Ensure that all wall fished cables exit points are finished off with either a wall busing or specialized wall plate.

Does NOT include:

• Running electric cords in-wall.
• Moving electrical outlets.
• Drilling additional holes not required to perform the above services.
• Repainting areas where access holes were drilled.
• Programming of any universal type learning remote.
• New setup of TiVo, Slingbox, or other DVR. (Use Single Component Hook Up Service)

Note:

• Electric cords cannot be run in-wall.
• Customer must arrange for electrical outlets to be moved.
• Customer must supply speaker and TV mounts.
• Only CL rated cables can be run in-wall.
• For video runs over ten (10) feet (non-HDMI), we recommend a Multi-Conductor Video Run.
• If additional access points are warranted, charge an additional TV Wires Concealed service.
• If additional wire runs are needed, use Multi-Conductor or Single Wire Run.
• If the appropriate length of CL rated cables were not purchased or are not available, we recommend a Multi- Conductor Video Run.
• Multi-Conductor cannot be terminated for DVI or HDMI connection.

On average, most rooms with multiple speakers mounted with concealed wires will not need more than the total amount of speaker wire allotted via this service. When necessary, use Single Wire Run along with this service for additional 100 feet of wire.